 Simple, agile and compact. Highly rational, without giving up qualitySmart has been designed with the aim of developing a door that is highly rational and modular, to ensure easier installation and trouble-free operation on component parts. A sturdy and compact supporting structure, original DITEC motorisation and components, excellent design and full testing along with curtain modularity; these are the features that make Smart a reliable door, with a very refined appearance but, above all, easy and quick to fit and practical to service and inspect. Compact structure Smart features a very compact supporting structure and reduced overall dimensions, is very reliable and refined in terms of appearance and comes in galvanised metal plate or STAINLESS steel. Thanks to the very reduced overall dimensions, this door can be installed where space is at a premium. Motorisation The motorisation, located outside the door structure, is complete with manual emergency re-opening device, with operation by means of a special movement rod. It also consists of a complete motor, reduction unit, brake and limit switch assembly. The primary parts of the automation are identical to those already fitted and thoroughly tested on other DITEC motorisations.
| Type of curtains (visible part) |  |
Curtain modularity Thanks to the curtain modularity, coloured and transparent sections can be fitted according to specific needs and any sections can be easily replaced if accidentally damaged. Technical specifications of curtain - Extruded in anodised aluminium compact model, containing the interchangeable sections.
- Max resistance to wind pressure: up to 50 km/h.
- Flexible curtain in self-extinguishing material with a standard from the centre distance of approx. 930 mm.
- P1 polyester class 2, with 1 window section.
- P2 polyester class 2, with 2 window sections.
Control and safety systems  |  |  | Flashing light | Infrared photocells | Magnetic coil detector |  |  |  | Radar | Radio-frequency transmitters | Pushbuttons |  |  |  | | Electric and pneumatic pushbuttons | Electric chain maouted overhead pushbuttons
| Traffic lights
|
| Dimensional specifications |  |
A practical solution for all requirements: Simple, agile and extremely compact, this is a highly effective solution for industrial, commercial sectors and large-scale distribution, able to cater for frame dimensions of up to 4 X PH 4.5 m. Wind resistance
|  |
Main technical specifications - Self-supporting metal structure, extremely compact, made of electrically galvanised steel (T1, T1X) or fine satin-finish AISI 304 stainless-steel (T1Y) profile sections, complete with quick wiring and safety photocells.
- RAL, extra charge for oven-baked epoxy coating with smooth finish.
- Axial gearmotor IP 54 for heavy-duty use: 400 V three-phase, opening/closing speed 0.8 m/s.
- Electronic panel IP 55 with partial opening and open-close-emergency stop push-button panel; autotest function.
- Manual emergency opening device complete with movement rod.
- Safety rib made of extruded anodised aluminium with ACS Anti-crash System in various versions.
| Panels may come in the following colours | | | | red
RAL 3002 | blue
RAL 5002
| orange
2009 | | | | grey
RAL 7038 | yellow
RAL 1021 | green
RAL 6026
| | | | cream
RAL 1015
| white
RAL 9016
| light blue
RAL 5012
|
Technical specifications | Power supply | 400 V, 50/60 Hz | | Input | 2 A | | Power | 0,6 kW | | Reduction ratio | 1:28 | | Drive | Direct by gearmotor with curtain winding pipe | | Opening speed | 0,8 m/s | | Closing speed | 0,8 m/s | | Min. transit opening PL x PH | 1500 x 2100 mm | | Max. transit opening PL x PH | 4000 x 4500 mm | | Curtain type | Sections in polyester fabric and transparent PVC, fitted in extruded aluminium sections | | Curtain thickness | Polyester fabric = 0.6 mm transparent PVC = 2 mm | | Self-extinguishing factor | Polyester fabric = class 2 transparent PVC = DIN 4102 | | Safety rib | CPA type electropneumatic with pressure switch, type CFA electronic with self-controlled photocell | | Release for manual opening | Movement rod to be fitted in the bottom part of the gearmotor | | DITEC service class | 4 heavy duty | | Intermittency | S2 = 20 minutes S3 = 30% | | Operating temperature | -20°C to + 55°C | | Curtain operating temperature | -5°C to + 50°C | | Protection degree | IP 54 | | Prearrangements | See installation manual | | Electronic control panel | 5QE44E |
|
Smart - rolling 
